Altec AIR
Altec AIR HRE Series Dual Tower Heated Regenerative Desiccant Air Dryer
High capacity dryer with low watt density heater and factory install pre and after-filters, -40° F/C standard outlet dew point
Request a tailored quote
Tell our team about your pressure, flow, voltage, and installation requirements.
Product overview
Built around your operating requirements.
Description
The Altec AIR HRE Series Dual Tower Heated Regenerative Desiccant Air Dryer applies heat to compressed air by way of a low-watt density heater. A regulated amount of the dried process air is then moved down through the desiccant bed (counter-current). This heated purge air is then exhausted to the atmosphere, removing the water vapor that is in the desiccant that was attached during the previous cycle.
Overview and Features
Features
- 100 to 3000 SCFM inlet flow rates available
- 150 PSI max inlet pressure
- 120°F max inlet temperature
- Factory installed filters
- Differential pressure gauges
- Pre-filter timer drain
- -40° F/C standard outlet dew point
- 120/1/60, 230/1/60, or 460/3/60 voltage depending on model
- OSHA approved mufflers
- Desiccant fill and drain ports
- ASME safety relief valves
- ISO 8573.1 Class 2
Available configuration, accessories, delivery, and commissioning requirements will be confirmed during quotation.
Available specifications
| Capacity | 100 SCFM, 130 SCFM, 200 SCFM, 250 SCFM, 300 SCFM, 400 SCFM, 550 SCFM, 650 SCFM, 800 SCFM, 1000 SCFM, 1250 SCFM, 1500 SCFM, 2000 SCFM, 2600 SCFM, 3000 SCFM |
|---|---|
| Voltage | 120/1/60, 230/1/60, 460/3/60 |
| Dew Point Purge Control | None, Add dew point purge control |
| Bypass and Dual Filter Kit | None, 3-way bypass, 6-way bypass and dual selectable pre-filter, 9-way bypass, dual selectable pre-filter, and post filter |
| Environment Temperature Protection | None, Add outdoor low ambient kit -20°F |