Vanair Viper D80, 80 CFM Diesel Driven Rotary Screw Air Compressors

Product overview

Built around your operating requirements.

The Vanair Viper D80 is a compact, direct drive rotary screw compressor for utility trucks and small contractors. A 24.8 HP, 3 cylinder Kubota engine with smart start technology delivers 80 CFM at 100psi. Vanair states it is suited to running 90 Lb. jackhammers, operating up to 4in piercing tools and blowing out irrigation systems.

What you get

• Fuel savings – automatic variable speed control slows the engine when demand drops.
• Straightforward controls – a push start panel with hour meter, pressure and temperature, fuel level gauge and engine RPM.
• Self-contained – a 60 AMP alternator, integrated battery and 9 gallon fuel tank.
• Protected operation – low oil pressure, high temperature and high pressure shutdowns, plus automatic blowdown.
• Durable airend – an oil injected, encapsulated rotary screw airend with a liquid cooled engine.

Sizing example

Total the CFM of tools that will run at the same time at 100psi and add around 10% for growth and leaks. A tool drawing about 70 CFM needs roughly 77 CFM, within the 80 CFM rating. Send us your figures and we will confirm the right size in your quotation.

Choosing between models

If you need more air from a bulkhead-mounted unit, see the Vanair Utility Series Rotary Screw Air Compressor.

Pairs well with

• Pneumatic Tools – jackhammers and piercing tools sized for this flow.
• Hose – air hose for reaching the work area.
• Hose Reels – reels for truck installations.
• Lubricants – oil for the oil injected airend.

Frequently asked questions