Altec AIR
Altec AIR HBS Series Single Tower Heated Regenerative Desiccant Air Dryer
High capacity, heated, single tower dryer with factory installed pre and after-filters, -50°F outlet dew point
Request a tailored quote
Tell our team about your pressure, flow, voltage, and installation requirements.
Product overview
Built around your operating requirements.
Description
The Altec AIR HBS Series single tower heated regenerative desiccant air dryer is more cost effective than the alternative refrigerated air dryer while still providing higher quality air. All HBS Series dryers are provided with factory installed pre and after-filters.
The HBS Series drying process takes the compressed air and flows it upward through the tower, where water molecules adhere to the porous surface of the desiccant. This results in dew points as low as -50°F. The built-in blower then directs a steady stream of low pressure air through the heater and then down through the tower. The heated air desorbs the accumulated moisture from the desiccant material, with the resulting purge air escaping to atmosphere through the exhaust muffler. The system is then cooled and re-pressurized, ready for the next cycle.
Overview and Features
Features
- 60 to 3000 SCFM inlet flow rates available
- 150 or 200 PSI max inlet pressure (depending on SCFM)
- Packaged filters:
- Oil removal to 99.9% at 0.3 to 0.6 microns
- Particle removal to 99.9% at 1 micron
- -50°F outlet dew point
- 120/1/60, 230/1/60, or 460/3/60 voltage depending on model
- 3-way electric ball valves
- Low watt density heater
- Industrial duty blower
Available configuration, accessories, delivery, and commissioning requirements will be confirmed during quotation.
Available specifications
| Capacity | 60 SCFM, 100 SCFM, 150 SCFM, 200 SCFM, 250 SCFM, 300 SCFM, 400 SCFM, 500 SCFM, 650 SCFM, 800 SCFM, 1000 SCFM, 1250 SCFM, 1600 SCFM, 2100 SCFM, 2600 SCFM, 3000 SCFM |
|---|---|
| Pressure | 200 PSI, 150 PSI |
| Voltage | 120/1/60, 230/1/60, 460/3/60 |
| Bypass and Dual Filter Kit | None, 3-way bypass |
| Environment Temperature Protection | None, Add outdoor low ambient kit -20°F |