Reliable Power. Precise Performance. · Technical support for every enquiry

info@centralasiacompressors.com

Van Air Systems

Van Air Systems D-Series Deliquescent Air Dryer

Single tower design for stationary applications

Air Compressor DryersDeliquescent Air DryersPrice on request

Request a tailored quote

Tell our team about your pressure, flow, voltage, and installation requirements.

Product overview

Built around your operating requirements.

Description

The Van Air Systems D-Series Deliquescent Air Dryer removes harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture as it slowly dissolves. Condensate drops to the bottom of the vessel to be drained, while dry compressed air exists the top of the vessel. Combined with Dry-O-Lite desiccant, the D-Series automatically provides a dew point that is approximately 20ºF lower than the temperature of the air at the vessel inlet. The unit is capable of protecting against freeze-ups in the winter and liquid in the summer. They can be installed inside or outside, and are suitable for low pressure applications with a pressure drop less than 1%. Because they require no moving parts or electrical components, the D-Series can also be applied in dirty and hazardous locations.

Applications

  • Industrial plant air
  • Blast rooms and paint booths
  • Rail yards
  • Landfill gas and digester gas
  • Ready mix, cement and asphalt plants

*D2 includes (2) 1.25 pouches of desiccant part number 33-0411. All other D-Series dryers do not include desiccant. All D48 and larger dryers must ship vertically via a flatbed.

Overview and Features

Features

  • 10 to 2,000 CFM capacity
  • Connection:
    • 3/4 to 3″ NPT
    • 3 to 4″ ANSI Flanged
  • 150 to 250 PSIG pressure rating
  • Manual drain valve
  • Sight windows to check desiccant
  • Vessel fabricated to ASME code
  • 20 to 63ºF dew point suppression
  • *D2 includes (2) 1.25 pouches of desiccant part number 33-0411. All other D-Series dryers do not include desiccant. All D48 and larger dryers must ship vertically via a flatbed.

Available configuration, accessories, delivery, and commissioning requirements will be confirmed during quotation.

Available specifications

Capacity10 CFM, 50 CFM, 100 CFM, 155 CFM, 250 CFM, 375 CFM, 625 CFM, 850 CFM
Connection3/4" NPT, 2" NPT, 3" NPT, 3" Flanged
Pressure250 PSIG, 200 PSIG, 175 PSIG

Not sure which compressor fits your operation?

Talk to an Expert →
Contact Us