Pneumatech
Pneumatech PB 210-635 HE Blower and Zero Purge Adsorption Dryer
-40 °F PDP or -100 °F PDP available
Request a tailored quote
Tell our team about your pressure, flow, voltage, and installation requirements.
Product overview
Built around your operating requirements.
Description
The Pneumatech PB 210-635 HE Blower and Zero Purge Adsorption Dryer uses heated blower purge air to remove moisture from the desiccant material and have therefore no purge loss during regeneration. The Zero Purge variants reduce life cycle costs even further by also eliminating purge loss during cooling. The cooling phase happens in a closed loop, hereby minimizing the performance impact at high ambient temperature and relative humidity.
Zero Purge variants are equipped with a purge back-up mode which switches the dryer to purge cooling mode in case PDP could not be met at ambient conditions outside of limitations.
Overview and Features
Features
- 232 psig standard
- 460V-3Ph-60Hz standard voltage
- -40°F PDP or -100°F PDP available
- 3 Filters standard (2 inlet & 1 outlet)
- Pressure drop 2.9 psid or less
- cULus listed
- NEMA 4 enclosure
Available configuration, accessories, delivery, and commissioning requirements will be confirmed during quotation.
Available specifications
| Dewpoint | -40°F, -100°F |
|---|---|
| Capacity | 212 SCFM, 318 SCFM, 392 SCFM, 530 SCFM, 636 SCFM, 170 SCFM, 254 SCFM, 314 SCFM, 424 SCFM, 509 SCFM |
| Connection | NPT 1.5, NPT 2 |